manualshive.com logo in svg

Toshiba Tecra M9, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Tecra M9 Скачать руководство пользователя страница 215

3.31 SETUP 

3  Tests and Diagnostics 

TECRA M9 Maintenance Manual (960-631) 

[CONFIDENTIAL] 

3-89 

SETUP Options 

The SETUP screen is divided into functionally related groups. This section describes each 
group and its options. 

1.

 

Memory 

This group of options displays the computer’s memory. 

(a)

 

Total 

This field displays the total amount of memory installed and is automatically 
calculated by the computer. You cannot change this value. 

2.

 

System Date/Time 

Use this option to set the computer’s system date/time.  

(a)

 

Date 

Use this option to set the system date of the computer. 

(b)

 

Time 

Use this option to set the system time of the computer. 

3.

 

Password 

          (a) User Password 

This option allows you to set or reset the user password for power on. 

Registered  

A password has been registered. 

 

Not Registered

  Change or remove the password. (Default) 

(c)

 

Supervisor Password 

This setting, which is displayed on the first page of the setup screen, allows you 
to register a Supervisor Password of the computer. 

Registered  

Supervisor Password has been registered. 

 

Not Registered

  Supervisor Password has not been registered (Default). 

For details on setting the password, refer to the Online Manual. 

Содержание Tecra M9































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды