Tico Pro-Spotter, Руководство по обслуживанию

Страница: 120 / 211

8-6 Service Manual
TICO Manufacturing
AIR SYSTEM PRO-SPOTTER
RELIEVING AIR SYSTEM
PRESSURE
See Figure 8-6.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Disconnect batteries. (See “BATTERY” on page 3-3.)
3. Pump brake pedal 30 times.
Figure 8-6: Air Reservoir Drain Pull Cord

CAUTION
4. Release air pressure using air reservoir drain pull
cords (1).
WET AIR TANK
Removal
See Figures 8-7, 8-8, and 8-9.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)

CAUTION
2. Release air system pressure. (See “RELIEVING AIR
SYSTEM PRESSURE” on page 8-6.)
Figure 8-7: Air Release Cables and Clamp
3. Remove cap screw (1), washers (2), and lock nut (3).
4. Remove air release cables (4 and 5) from clamp (6)
and set aside.
1 Air Reservoir Drain Pull
Cord (3 used)
• Avoid personal injury from explosion. Air
system components may contain pressurized
gases. Exposure to excessive heat may
cause components to explode.
• Avoid personal injury from high-pressure
gases or debris. High-pressure release of
gases or debris from a pressurized system
can cause penetrating injuries. Relieve
system pressure from air system before
servicing.
1
TPS-086
• Avoid personal injury from explosion. Air
system components may contain pressurized
gases. Exposure to excessive heat may
cause components to explode.
• Avoid personal injury from high-pressure
gases or debris. High-pressure release of
gases or debris from a pressurized system
can cause penetrating injuries. Relieve
system pressure from air system before
servicing.
1 Cap Screw 4 Air Release Cable
2 Washer (2 used) 5 Air Release Cable
3 Lock Nut 6 Clamp
2
TPS-094
1
3
4
5
6
2