Tico Pro-Spotter, Руководство по обслуживанию

Страница: 107 / 211

PRO-SPOTTER FRONT AXLE & STEERING
TICO Manufacturing
Service Manual 6-15
Figure 6-20: Steering Knuckle
Inspection
• Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
• Clean all parts of dirt and debris.
• Inspect parts for wear or damage. Replace as
needed.
• Check all bushings (19) and shims (17) for damage.
Replace parts found to be unserviceable.
Installation
Installation is the reverse of the removal procedure.
• Perform wheel alignment. (See “FRONT END
ALIGNMENT” on page 6-5.)
7 Cap Screw (3 used) 12 Washer (3 used) 17 Shim (as required) 22 Front Axle
8 Washer (3 used) 13 Lower Cap 18 Grease Fitting (2 used) 23 Nut (3 used)
9 Upper Cap 14 Gasket 19 Bushing (2 used) 24 Cotter Pin (3 used)
10 Gasket 15 Steering Knuckle 20 Arm
11 Cap Screw (3 used) 16 King Pin 21 Arm
7
TPS-179
18
18
9
10
8
19
19
15
14
13
16
11
12
21
20
17
22
23
23
23
24
24
24