Tico Pro-Spotter, Руководство по обслуживанию

Страница: 161 / 211

PRO-SPOTTER CAB
TICO Manufacturing
Service Manual 13-7
CAB LATCH
Adjustment
See Figures 13-9 and 13-10.
NOTE
Procedure is written for the left side cab latch. Right side
cab latch procedure is similar.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
Figure 13-9: Lock Bar
2. Raise cab completely and allow it to settle into detent
position 1 (full open) (1) of the lock bar (4).
Figure 13-10: Cab Latch (left side shown)
3. Apply alignment marks to bracket and adjuster to aid
when adjusting.
4. Loosen lock nuts (9).
5. Adjust cab latch (10) by repositioning cab latch on
the frame as necessary.
6. Tighten lock nuts.
7. Slowly lower cab. Check alignment between cab
latch and cab air bag striker. (See “CAB AIR BAG” on
page 13-3.)
1 Detent Position 1 (full open) 3 Detent Position 3 (minimum
open)
2 Detent Position 2 (half
open) 4 Lock Bar
TPS-083
1
2
3
4
9 Lock Nut (4 used) 10 Cab Latch
9
TPS-149
10