Tico Pro-Spotter, Руководство по обслуживанию

Страница: 199 / 211

PRO-SPOTTER HEATING AND AIR CONDITIONING
TICO Manufacturing
Service Manual 15-15
EVAPORATOR
Removal
See Figures 15-11, 15-12, 15-13, 15-14, 15-15, 15-16,
and 15-17.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Remove front right cover. (See “FRONT COVERS
AND GUARDS” on page 14-3.)
3. Recover existing R134a refrigerant from the system.
(See “Recover R134a Refrigerant” on page 15-7.)
Figure 15-11: Fresh Air Filter
4. Loosen nuts (1). Remove plate (2) and fresh air filter
(3).
NOTE
Cap screws (6) do not need to be removed in order to
remove interior covers (7 and 8).
Figure 15-12: Interior Covers
5. Remove cap screws (4 and 5). Remove interior
covers (7 and 8) as an assembly.
Figure 15-13: Blower Motor Cover
6. Install identification tags and disconnect electrical
connectors (9—12).
7. Install identification tags and disconnect hoses (13—
17).
8. Remove cap screws (18) and upper cover (19).
Figure 15-14: Blower Motor Cover (front)
9. Remove cap screws (20) and set valve (21) aside.
10. Remove cap screws (22). Roll blower motor cover
(23) assembly to interior.
1 Nut (2 used) 3 Fresh Air Filter
2 Plate
4 Cap Screw (7 used) 7 Interior Cover
5 Cap Screw (5 used) 8 Interior Cover
6 Cap Screw (3 used)
1
TPS-129
2
3
4
TPS-130
5
6
7
8
9 Electrical Connector 15 Hose
10 Electrical Connector 16 Hose
11 Electrical Connector 17 Hose
12 Electrical Connector 18 Cap Screw (10 used)
13 Hose 19 Upper Cover
14 Hose
20 Cap Screw (2 used) 22 Cap Screw (6 used)
21 Valve 23 Blower Motor Cover
9
TPS-131
10
11
12
13
14
15
16
17
18
19
20
TPS-132
21
22
23