Tico Pro-Spotter, Руководство по обслуживанию

Страница: 150 / 211

12-6 Service Manual
TICO Manufacturing
BOOM AND FIFTH WHEEL PRO-SPOTTER
Lubrication
Air Cylinder
See Figure 12-8.
Figure 12-8: Air Cylinder
1. Inspect air cylinder tube (8) and piston shaft (9) for
dents, bending, or other damage. Replace as
necessary.
2. Engage air cylinder control to extend the piston shaft
fully.
3. Clean exposed piston shaft with penetrating oil and a
clean shop towel. Do not use abrasives on the
exposed shaft as they could damage the piston shaft.
4. Disengage air cylinder control to retract the piston
and shaft.
5. Remove the supply air line and add four drops of air
tool oil to cylinder through supply fitting (12).
6. Reinstall supply air line.
7. Engage and disengage air cylinder control 3 times to
work the air tool oil into the cylinder and onto the
piston.
8. Verify proper operation.
Contact Surface
See Figure 12-9.
Figure 12-9: Fifth Wheel Lubrication Surface
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Remove old grease and debris from the fifth wheel
lubrication surface (11).
3. Apply new water-resistant, lithium-based grease to
the fifth wheel lubrication surface.
4. Clean grease grooves if a large amount of debris is
present.
8 Air Cylinder Tube 12 Supply Fitting
9 Piston Shaft
12
TPS-028
8
9
11 Lubrication Surface (as
necessary)
TPS-025
11