Tico Pro-Spotter, Руководство по обслуживанию

Страница: 142 / 211

11-8 Service Manual
TICO Manufacturing
HYDRAULIC SYSTEM PRO-SPOTTER
HYDRAULIC TANK
Removal
See Figures 11-9, 11-10, 11-11, and 11-12.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Close hydraulic tank shut offs. (See “HYDRAULIC
SYSTEM SHUT OFF VALVES” on page 11-6.)
3. Drain hydraulic tank. (See “Hydraulic Fluid Draining”
on page 11-5.)
Figure 11-9: Hydraulic Filter Assembly
4. Remove U-bolts (7), washers (8), lock nuts (6), and
clamp (5). Move clamp and air release cord (4) aside.
NOTE
The hydraulic lines (2 and 3) do not need to be removed
from the hydraulic filter assembly (1).
5. Remove cap screws (9) and washers (10) and set
hydraulic filter assembly (1) aside.
Figure 11-10: Hydraulic Tank (rear)
6. Install identification tags and disconnect hydraulic
line (3). Close all openings using caps and plugs.
7. Remove cap screw (14), washers (15), lock nut (16),
and clamp (7).
SYMPTOM POSSIBLE CAUSE SUGGESTED SOLUTION
ADDITIONAL
INFORMATION
Hydraulic oil
foamy
Suction leak between
reservoir and pump Inspect and tighten all
connections and lines.
Repair or replace any
defective components.
Hydraulic oil level is low Fill hydraulic tank with
proper oil to specified level. See “CHECK FLUID LEVEL”
on page 11-2 or
see “Hydraulic Fluid Filling”
on page 11-5.
Improper viscosity hydraulic
oil Drain and refill with proper
oil to specified level. See “LUBRICATION
CHART” on page 2-9 or see
“Hydraulic Fluid Draining” on
page 11-5.
1 Hydraulic Filter Assembly 8 Washer (4 used)
2 Hydraulic
Filter-to-Directional Control
Valve Hydraulic Line 9 Cap Screw (2 used)
3 Hydraulic
Filter-to-Hydraulic Tank
Hydraulic Line 10 Washer (2 used)
4 Air Release Cord 11 Hydraulic Tank
5 Clamp 12 Cap Screw (4 used)
6 Lock Nut (4 used) 13 Washer (8 used)
7 U-Bolt (2 used)
4
TPS-107
5
3
2
1
9
10
8
7 6
13
12
11
2 Suction Hydraulic Line 14 Cap Screw
3 Hydraulic
Filter-to-Hydraulic Tank
Hydraulic Line 15 Washer (2 used)
11 Hydraulic Tank 16 Lock Nut
12 Cap Screw (4 used) 17 Clamp
13 Washer (8 used)
3
TPS-118
12
13
2
14
16
15
17
11