Tico Pro-Spotter, Руководство по обслуживанию

Страница: 182 / 211

14-12 Service Manual
TICO Manufacturing
COVERS AND GUARDS PRO-SPOTTER
Figure 14-19: Off-Road Aftertreatment Covers

CAUTION
3. Remove cap screws (10), washers (11), lock nuts
(12), and intermediate aftertreatment cover (4).
4. Remove cap screws (13), washers (14), lock nuts
(15), and plate (16).
5. Remove cap screws (17), washers (18), lock
washers (19), and lower aftertreatment cover (3).
6. Remove cap screws (20), washers (21), lock nuts
(22), and rear heat shield (23).
7. Remove cap screws (24), washers (25), lock nuts
(26), and upper aftertreatment cover (5).
8. Remove cap screws (27), washers (28), lock nuts
(29), and mud guard (30).
9. Remove cap screws (31), washers (32), lock nuts
(33), and front heat shield (34).
3 Lower Aftertreatment
Cover 14 Washer (8 used) 21 Washer (6 used) 28 Washer (5 used)
4 Intermediate
Aftertreatment Cover 15 Lock Nut (4 used) 22 Lock Nut (3 used) 29 Lock Nut (5 used)
5 Upper Aftertreatment
Cover 16 Plate 23 Rear Heat Shield 30 Mud Guard
10 Cap Screw (6 used) 17 Cap Screw (6 used) 24 Cap Screw (2 used) 31 Cap Screw (3 used)
11 Washer (6 used) 18 Washer (6 used) 25 Washer (4 used) 32 Washer (3 used)
12 Lock Nut (6 used) 19 Lock Washer (6 used) 26 Lock Nut (2 used) 33 Lock Nut (3 used)
13 Cap Screw (4 used) 20 Cap Screw (3 used) 27 Cap Screw (5 used) 34 Front Heat Shield
3
TPS-167
4
5
16
23
20
21
22
10
11
12
13
14
15
24
30
31
32
33
25
17
18
27
28
29
19
34
26
Avoid injury and serious burns from hot
components. Allow aftertreatment covers and
heat shields to cool before removing.