Tico Pro-Spotter, Руководство по обслуживанию

Страница: 170 / 211

13-16 Service Manual
TICO Manufacturing
CAB PRO-SPOTTER
WIPER MOTOR
Removal
See Figures 13-29 and 13-30.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Lower cab completely and allow it to settle into full
resting position.
Figure 13-29: Wiper Motor Cover
3. Remove cap screws (1) and wiper motor cover (2).
Figure 13-30: Wiper Motor
4. Install identification tags and disconnect electrical
connector (3).
5. Remove clips (4) and set arms (5) aside.
6. Remove nuts (6) and wiper motor (7).
7. Repair or replace components as necessary.
Inspection
• Clean all parts of dirt and debris.
• Inspect washer hoses, fittings, and clamps for leaks,
holes, cracks, and loose connections. Replace parts
found to be unserviceable.
• Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
• Inspect electrical connectors and wiring for damage,
corrosion, or loose connections. Replace parts found
to be unserviceable.
Installation
Installation is the reverse of the removal procedure.
1 Cap Screw (14 used) 2 Wiper Motor Cover
3 Electrical Connector 6 Nut (2 used)
4 Clip (2 used) 7 Wiper Motor
5 Arm (2 used)
1
TPS-154
2
3
TPS-168
4
5
6
7