Tico Pro-Spotter, Руководство по обслуживанию

Страница: 202 / 211

15-18 Service Manual
TICO Manufacturing
HEATING AND AIR CONDITIONING PRO-SPOTTER
Figure 15-22: Blower Motor
11. Install identification tags and disconnect electrical
connectors (24 and 25).
12. Move blower motor (26) and blower motor cover (23)
to interior of cab.
Figure 15-23: Freeze Probe
13. Remove clamp (27) and freeze probe (28) from
within evaporator (29).
14. Remove cap screws (30) and cover plate (31).
Figure 15-24: Heater Core
15. Remove cap screws (32) and plate (33).
16. Install identification tags and disconnect coolant lines
(34 and 35). Close all openings using caps and
plugs.
17. Remove heater core (36).
18. Repair or replace components as necessary.
Inspection
• Clean all parts of dirt and debris.
• Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
• Check condition of cooling system lines and tubing.
Installation
Installation is the reverse of the removal procedure.
• Fill cooling system. (See “Cooling System Filling” on
page 4-15.)
23 Blower Motor Cover 25 Electrical Connector
24 Electrical Connector 26 Blower Motor
27 Clamp 30 Cap Screw (4 used)
28 Freeze Probe 31 Cover Plate
29 Evaporator
26
TPS-133
23
24
25
27
TPS-137
28
29
30
31
32 Cap Screw (2 used) 35 Coolant Line
33 Plate 36 Heater Core
34 Coolant Line
TPS-134
32
33
35
34
36