Tico Pro-Spotter, Руководство по обслуживанию

Страница: 89 / 211

PRO-SPOTTER TRANSMISSION
TICO Manufacturing
Service Manual 5-5
TRANSMISSION FILTER
Figure 5-7: Transmission Filter Assembly
Removal
See Figure 5-7.
NOTE
Transmission fluid does not require draining if only filters
are being replaced.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Disconnect battery cables. (See “BATTERY” on
page 3-3.)
3. Position a suitable container under the lube and main
filter covers (1 and 2).
4. Loosen cap screws (3) and allow transmission fluid to
drain.
5. Remove cap screws, filter covers, and gaskets (4).
Properly dispose of gaskets.
6. Remove and properly dispose of O-rings (5 and 6)
and filters (7).
7. Repair or replace components as necessary.
Inspection
• Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
• Clean all parts of dirt and debris.
1 Lube Filter Cover 3 Cap Screw (12 used) 5 O-Ring (2 used) 7 Filter (2 used)
2 Main Filter Cover 4 Gasket (2 used) 6 O-Ring (2 used)
MAIN
LUBE
1
TPS-072
5
7
1
2
3
4
6
2