Tico Pro-Spotter, Руководство по обслуживанию

Страница: 127 / 211

PRO-SPOTTER ABS/ATC SYSTEM
TICO Manufacturing
Service Manual 9-5
FRONT QUICK RELEASE BRAKE
VALVE
Removal
See Figures 9-4 and 9-5.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)

CAUTION
2. Release air system pressure. (See “RELIEVING AIR
SYSTEM PRESSURE” on page 8-6.)
3. Remove brush guard. (See “FRONT COVERS AND
GUARDS” on page 14-3.)
Figure 9-4: Front Quick Release Brake Valve
4. Install identification tags and disconnect air lines (1—
3). Close all openings using caps and plugs.
Figure 9-5: Cap Screws and Washers
5. Remove cap screws (4), washers (5), lock nuts (6),
and front quick release brake valve (7).
6. Repair or replace components as necessary.
Inspection
• Clean all parts of dirt and debris.
• Inspect air lines, fittings, and valves for leaks, holes,
cracks, and loose connections. Replace parts found
to be unserviceable.
• Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
Installation
Installation is the reverse of the removal procedure.
• Test operation of brake system.
• Avoid personal injury from explosion. Air
system components may contain pressurized
gases. Exposure to excessive heat may
cause components to explode.
• Avoid personal injury from high-pressure
gases or debris. High-pressure release of
gases or debris from a pressurized system
can cause penetrating injuries. Relieve
system pressure from air system before
servicing.
1 Air Line 5 Washer (4 used)
2 Air Line 6 Lock Nut (2 used)
3 Air Line 7 Front Quick Release Brake
Valve
4 Cap Screw (2 used)
3
TPS-113
1
2
7
5
6
4
4 Cap Screw (2 used) 5 Washer (4 used)
4
TPS-116
5