Tico Pro-Spotter, Руководство по обслуживанию

Страница: 105 / 211

PRO-SPOTTER FRONT AXLE & STEERING
TICO Manufacturing
Service Manual 6-13
STEERING GEAR BOX
Removal
See Figures 6-17 and 6-18.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)

WARNING
2. Using an appropriate lifting device, raise the front
end of the tractor. (See “Use Lifting Equipment
Safely” on page 1-4.)
3. Support the tractor using jack stands. (See “Support
Tractor Securely” on page 1-3.)
NOTE
Preventing the steering wheel from rotating will make the
steering gear box alignment easier.
4. Lock steering wheel into place.
Figure 6-17: Steering Arm
5. Remove cotter pin (1) and nut (2) from drag link (3).
6. Remove drag link from steering arm (4).
Figure 6-18: Steering Gear Box
7. Remove nut (5), cap screw (6), and steering shaft
(7).
8. Remove hydraulic lines (8 and 9) from steering gear
box (10). Close all openings using caps and plugs.

WARNING
9. Using an appropriate lifting device, support the
steering gear box.
10. Remove cap screws (11), washers (12), nuts (13),
and steering gear box.
11. Repair or replace components as necessary.
• Prevent possible crushing injury or death.
Use appropriate lifting device.
• Support the tractor using properly rated jack
stands. Never work under a tractor supported
only by a jack.
• Do not use wood or concrete blocks to
support the tractor. Failure to properly
support the tractor may result in death or
serious injury.
1 Cotter Pin 3 Drag Link
2 Nut 4 Steering Arm
1
TPS-164
2
4
3
4 Steering Arm 9 Hydraulic Line
5 Nut 10 Steering Gear Box
6 Cap Screw 11 Cap Screw (3 used)
7 Steering Shaft 12 Washer (6 used)
8 Hydraulic Line 13 Nut (3 used)
Prevent possible crushing injury or death. Use
appropriate lifting device.
4
TPS-165
7
5
6
8
9
10
11
12
13