Tico Pro-Spotter, Руководство по обслуживанию

Страница: 32 / 211

1-4 Service Manual
TICO Manufacturing
GENERAL INFORMATION PRO-SPOTTER
Use Lifting Equipment Safely

WARNING
• Always use a lifting device with a lifting capacity
greater than the weight of the item being lifted.
• Secure the load to the lifting device using cables,
chains, or slings rated to handle the load being lifted.
Fasteners being used to connect lifting devices must
be strong enough to handle the load. Also, be sure
the mounting point of load is strong enough to handle
the load.
• When connecting to the load, ensure the load is
balanced.
• Always use a lifting device on a hard, level surface.
• Lower the lifting device to the lowest point before
moving. Move the load slowly.
• Always support the load as soon as possible; never
leave a load suspended in mid-air.
Use Compressed Air and Air Tools
Safely

WARNING
• Compressed air is a useful tool when used in a safe
manner.
• Always use eye and ear protection while using
compressed air and air tools.
• When using air tools, do not exceed the air pressure
rating for the tool.
• When using an impact wrench, always use approved
impact sockets. Never use standard sockets on an
impact wrench.
• Disconnect the air supply before changing air tool
attachments.
• Never point air nozzles or air tools at another person.
• Always maintain air tools properly.
Service Tires Safely

WARNING
• Always wear safety glasses or goggles.
• Use proper lifting methods when working with wheels
and tires.
• When working on an inflated tire, never position
yourself directly over the work area.
• When dismounting or mounting tires, use a wheel
holder or tire tractor. Use proper tire mounting tools
and equipment. Never use screwdrivers or makeshift
tools to force a tire on or off a wheel.
• Be sure tire irons and mounting tools are free of
grease and oil. Grip them firmly.
• Inspect wheel parts for rust, damage, or distortion.
Never use wheels that are out-of-round, rusted, or
cracked.
• Never hammer on wheels with a steel hammer. Use
rubber-covered hammers.
• When inflating tires, always use an inflation cage.
Always stand away from the valve stem.
• Use accurate, tested inflation gauges to set air
pressures.
Service Electrical Components Safely

WARNING
• Disconnect the battery negative (–) cable before
removing or installing electrical components. Always
connect the battery negative (–) cable last.
• Certain test and adjustment procedures must be
performed with the battery connected. Use care to
prevent arcing when working on live circuits or
components. Arcing can cause component damage
and could ignite flammable materials.
Always check the lifting capacity and condition of
hoists, slings, cables, or chains before use. Using
underrated or worn lifting components could
result in death or serious injury.
Always wear approved eye and ear protection
while using compressed air. Misuse of
compressed air could result in death or serious
injury.
• When using air nozzles, air pressure should
not exceed 206.8 kPa (30 psi).
• Never direct air nozzles or tools at a person.
• Never point air nozzles directly at skin.
An inflated tire contains explosive force. Use care
when handling wheels and tires.
Always disconnect the battery negative cable
first and battery positive cable last. Connect
battery positive cable first and battery negative
cable last. Be careful when testing live circuits to
prevent arcing. Arcing could result in death or
serious injury.