Tico Pro-Spotter, Руководство по обслуживанию

Страница: 164 / 211

13-10 Service Manual
TICO Manufacturing
CAB PRO-SPOTTER
Removal
See Figures 13-15 and 13-16.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
Figure 13-15: Lock Bar
2. Raise cab completely and allow it to settle into detent
position 1 (full open) (1) of the lock bar (4).
3. Apply alignment marks to bracket and adjuster to aid
when installing.
Figure 13-16: Cab Leveling Valve
4. Install identification tags and disconnect air lines (6—
8). Close all openings using caps and plugs.
5. Remove nut (9) and disconnect linkage (10).
6. Remove lock nuts (12), washers (11), and cab
leveling valve (5).
7. Repair or replace components as necessary.
Inspection
• Clean all parts of dirt and debris.
• Inspect air lines, fittings, and connections for leaks,
holes, cracks, and loose connections. Replace parts
found to be unserviceable.
• Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
Installation
Installation is the reverse of the removal procedure.
• Check cab ride height and adjust as necessary. (See
“Adjustment” on page 13-9.)
1 Detent Position 1
(full open) 3 Detent Position 3
(minimum open)
2 Detent Position 2
(half open) 4 Lock Bar
TPS-083
1
2
3
4
5 Cab Leveling Valve 9 Nut
6 Air Line 10 Linkage
7 Air Line 11 Washer (2 used)
8 Air Line 12 Lock Nut (2 used)
5
TPS-147
6
7
8
9
10
12
11