manualshive.com logo in svg

Thermo 49i, Инструкция по эксплуатации, Страница: 33 / 276

Поделиться
Скачать
Thermo 49i Скачать руководство пользователя страница 33

Operation

Pushbuttons

Thermo Fisher Scientific

Model 49

i

 Primary Standard Instruction Manual

3-3

Pushbuttons

The Pushbuttons allow the user to traverse the various screens/menus.

Figure 3-2. 

Front Panel Pushbuttons

Table 3-1. 

Front Panel Pushbuttons

 = Soft Keys

The 

 soft keys are used to provide shortcuts that 

allow the user to jump to user-selectable menu screens. For 
more information on processing soft keys, see “Soft Keys” 
below.

 

=

 

Run

The 

 is used to display the Run screen. The Run 

screen normally displays the O

3

 concentration.

 = Menu

The 

 is used to display the Main Menu when in the 

Run screen, or back up one level in the menu system. For 
more information about the Main Menu, see “Main Menu” 
later in this chapter.

 

= Help

The 

 is context-sensitive, that is, it provides 

additional information about the screen that is being 
displayed. Press 

 for a brief explanation about the 

current screen or menu. Help messages are displayed using 
lower case letters to easily distinguish them from the 
operating screens. To exit a help screen, press 

 or 

 

to return to the previous screen, or 

 to 

return to the Run screen.

 = Up, Down

 = Left, Right

The four arrow pushbuttons  (

, 

, 

, 

and 

) move the cursor up, down, left, and right or 

change values and states in specific screens.

 = Enter

The 

 is used to select a menu item, 

accept/set/save a change, and/or toggle on/off functions.

Содержание 49i





















































































































































































































































































Отзывы:

Нет отзывов