manualshive.com logo in svg

Thales Z-Max, Руководство по эксплуатации и применению

Magellan Z-Max - ваш надежный путеводитель в путешествиях! Получите инструкцию по эксплуатации "Getting Started" для вашего устройства совершенно бесплатно. Скачайте ее с manualshive.com. Начните пользоваться всеми возможностями продукта уже сегодня!

Поделиться
Скачать
background image

iii

THALES NAVIGATION PROFESSIONAL PRODUCTS - LIMITED WARRANTY

(North, Central and South America)

Thales Navigation warrants their GPS receivers and hardware accessories to be free of defects in 
material and workmanship and will conform to our published specifications for the product for a period 
of one year from the date of original purchase. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL 
PURCHASER OF THIS PRODUCT. 

In the event of a defect, Thales Navigation will, at its option, repair or replace the hardware product 
with no charge to the purchaser for parts or labor. The repaired or replaced product will be warranted 
for 90 days from the date of return shipment, or for the balance of the original warranty, whichever is 
longer.  Thales Navigation warrants that software products or software included in hardware products 
will be free from defects in the media for a period of 30 days from the date of shipment and will 
substantially conform to the then-current user documentation provided with the software (including 
updates thereto).  Thales Navigation's sole obligation shall be the correction or replacement of the 
media or the software so that it will substantially conform to the then- current user documentation.  
Thales Navigation does not warrant the software will meet purchaser's requirements or that its 
operation will be uninterrupted, error-free or virus-free.  Purchaser assumes the entire risk of using the 
software.

PURCHASER'S EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR ANY IMPLIED 
WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT, AT THALES 
NAVIGATION'S OPTION, OF ANY DEFECTIVE PART OF THE RECEIVER OR ACCESSORIES 
WHICH ARE COVERED BY THIS WARRANTY. REPAIRS UNDER THIS WARRANTY SHALL ONLY 
BE MADE AT AN AUTHORIZED THALES NAVIGATION SERVICE CENTER. ANY REPAIRS BY A 
SERVICE CENTER NOT AUTHORIZED BY THALES NAVIGATION WILL VOID THIS WARRANTY.

To obtain warranty service the purchaser must obtain a Return Materials Authorization (RMA) number 
prior to shipping by calling 800-229-2400 (U.S.) or 408 615 3981 (International), or by sending a repair 
request on-line at http://products.thalesnavigation.com/en/support/rma.asp. The purchaser must 
return the product postpaid with a copy of the original sales receipt to the address provided by Thales 
Navigation with the RMA number.  Purchaser's return address and the RMA number must be clearly 
printed on the outside of the package.

Thales Navigation reserves the right to refuse to provide service free-of-charge if the sales receipt is 
not provided or if the information contained in it is incomplete or illegible or if the serial number is 
altered or removed. Thales Navigation will not be responsible for any losses or damage to the product 
incurred while the product is in transit or is being shipped for repair.  Insurance is recommended.  
Thales Navigation suggests using a trackable shipping method such as UPS or FedEx when returning 
a product for service.

EXCEPT AS SET FORTH IN THIS LIMITED WARRANTY, ALL OTHER EXPRESSED OR IMPLIED 
WARRANTIES, INCLUDING THOSE OF FITNESS FOR ANY PARTICULAR PURPOSE, 
MERCHANTABILITY OR NON-INFRINGEMENT, ARE HEREBY DISCLAIMED AND IF APPLICABLE, 
IMPLIED WARRANTIES UNDER ARTICLE 35 OF THE UNITED NATIONS CONVENTION ON 
CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS. Some national, state, or local laws do 
not allow limitations on implied warranty or how long an implied warranty lasts, so the above limitation 
may not apply to you.

The following are excluded from the warranty coverage: (1) periodic maintenance and repair or 
replacement of parts due to normal wear and tear; (2) batteries and finishes; (3) installations or defects 
resulting from installation; (4) any damage caused by (i) shipping, misuse, abuse, negligence, 
tampering, or improper use; (ii) disasters such as fire, flood, wind, and lightning; (iii) unauthorized 
attachments or modification; (5) service performed or attempted by anyone other than an authorized 
Thales Navigations Service Center; (6) any product, components or parts not manufactured by Thales 

G3.book  Page iii  Saturday, May 24, 2003  12:52 PM

Содержание Z-Max



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z-Max

Navigon 23 Series Quick Installation Manual preview
23 Series
Бренд: Navigon Страницы: 2
Garmin NUVI 1490TV Owner'S Manual preview
NUVI 1490TV
Бренд: Garmin Страницы: 76
Garmin GPSMAP 76Cx Owner'S Manual preview
GPSMAP 76Cx
Бренд: Garmin Страницы: 58
Garmin GPSMAP 76 series Owner'S Manual And Reference Manual preview
GPSMAP 76 series
Бренд: Garmin Страницы: 81
Garmin nuvi 880 Quick Start Manual preview
nuvi 880
Бренд: Garmin Страницы: 118
Sony ZS-BT1 - Boombox With Bluetooth Technology Operating Instructions preview
ZS-BT1 - Boombox With Bluetooth Technology
Бренд: Sony Страницы: 2
Sony XA-NV300T Instructions preview
XA-NV300T
Бренд: Sony Страницы: 2
Sony XA-NV100T Specifications preview
XA-NV100T
Бренд: Sony Страницы: 2
Sony XA-NV300T Service Manual preview
XA-NV300T
Бренд: Sony Страницы: 4
Sony XA-NV100T Instructions preview
XA-NV100T
Бренд: Sony Страницы: 2
Sony NVU84 - Widescreen Portable GPS Navigator Specifications preview
NVU84 - Widescreen Portable GPS Navigator
Бренд: Sony Страницы: 1
Sony NV-U82 Installation Manual preview
NV-U82
Бренд: Sony Страницы: 2
Sony NV-U52B Installation Manual preview
NV-U52B
Бренд: Sony Страницы: 2
Sony VAIO VGP-BGU1 Operating Instructions Manual preview
VAIO VGP-BGU1
Бренд: Sony Страницы: 23
Sony NVD-U02E Operating Instructions Manual preview
NVD-U02E
Бренд: Sony Страницы: 51
Sony NV-U74 Instruction Manual preview
NV-U74
Бренд: Sony Страницы: 54
Sony NV-U74 Service Manual preview
NV-U74
Бренд: Sony Страницы: 58
Sony NV-U94T - Automotive GPS Receiver Quick Start Manual preview
NV-U94T - Automotive GPS Receiver
Бренд: Sony Страницы: 104

Бренды по названию

Популярные бренды

Загрузить еще бренды