6
Z-Max Surveying System Operation and Applications Manual
There are two ways to determine what options have been enabled; using the front
panel display or a serial port command. To use the front panel display, go to the
OPTIONS function in the SYSINFO menu. The firmware option characters will be
displayed in the order presented in Table 1.2. If the character is displayed, then that
option is enabled. If the option is disabled, then a dash will occupy the space where
that character would be. (See the Front Panel User Interface section of Chapter 4 -
Operation
for more information about accessing the front panel display.)
Enabled options can also be verified by issuing the $PASHQ,RID serial port
command. The response message to the $PASHQ,RID command is a string that will
look similar to the following:
$PASHR,RID,ZA,30,ZM30,BUEMFT3JKIGH0A01*cc
To see which options are enabled, look at the string "BUE-MFT3JKIGH" in the
response message. Each option is represented by a character displayed in the order
presented in Table 1.2. The description of all options available is as follows:
OPTION B - RTCM Base
When this option is enabled, the receiver can be set as an RTCM base station
capable of outputting real-time RTCM differential corrections. The output will be in
RTCM-104, version 2.3 format. Message types available are types 1, 2, 3, 6, 9 and
16. If the K option (RTK Base) is enabled, RTCM message types 18/19 and 20/21 are
also available.
OPTION U - RTCM Rover
When this option is enabled, the receiver can be set as an RTCM rover station
capable of receiving real-time RTCM differential corrections. The receiver will decode
the RTCM-104, version 2.3 format message types 1, 2, 3, 6, 9 and 16. If the J option
(RTK Rover) is enabled, RTCM message types 18/19 and 20/21 can also be
decoded.
OPTION E - Event Marker
The E option enables the storage of event time created from a trigger signal. The
receiver measures and records event times with high accuracy (down to one
microsecond). The receiver stores an event time at the rising edge of the trigger
signal (or the falling edge on command) and the time is recorded in the receiver's SD
card and/or output through the NMEA-format TTT message.
OPTION M - GSM Modem
The GSM Modem option allows you to set the GSM modem’s data link parameters,
dial, and display transmit/receive status of the GSM communication link.
G3.book Page 6 Saturday, May 24, 2003 12:52 PM
Содержание Z-Max
