manualshive.com logo in svg

Thales Z-Max, Руководство по эксплуатации и применению

Magellan Z-Max - ваш надежный путеводитель в путешествиях! Получите инструкцию по эксплуатации "Getting Started" для вашего устройства совершенно бесплатно. Скачайте ее с manualshive.com. Начните пользоваться всеми возможностями продукта уже сегодня!

Поделиться
Скачать
background image

Introduction

3

Operation and Reference

The Z-Max System includes the following major components : 

•

Z-Max GPS Module

: the GPS Receiver Module that contains the GPS 

receiver, the removable SD memory card, front panel display, external 
serial ports, USB port and the power port. 

•

Max-Trac GPS Antenna Module

: the module that contains the GPS 

antenna hardware that supplies GPS signal to the Z-Max. 

•

Communication Module

: the module that contains data links that enable 

real-time GPS surveying. If the system is not intended for real-time 
surveying, an empty Communication Module (V-Module) will be required 
to seal the Z-Max against moisture. 

•

Vortex UHF Antenna Module

: the module that contains the antenna for 

UHF radios. If the system is not intended for real-time surveying, an empty 
UHF antenna module will be used to complete the 2-meter range pole. 

•

Power Module

: contains the lithium ion batteries to power the Z-Max. 

•

Handheld Computer/Field Application Software:

 the Z-Max system 

offers you a choice of portable data collectors and graphical field software 
to control the receiver during GPS surveys.

Additional algorithmic enhancements inside the Z-Max significantly increase the 
availability of precision RTK solutions at long ranges and in harsh environments. The 
Z-Max algorithms automatically analyze operational conditions and optimize internal 
parameters to best meet the challenges of real-world environments. 

Functional Description 

The receiver is activated when the Power button is pushed. Provided that a power 
source is connected, the unit will perform a self-test and then initialize its tracking 
channels and begin searching for all satellites (SVs) within the field of view of the GPS 
antenna. The receiver can track up to 12 satellites at the same time. The number of 
available satellites varies based on the geographic location and the time of day. In an 
open environment, the receiver will typically track 5-10 satellites simultaneously. As 
the receiver acquires (locks onto) each SV, it obtains the time information, collects the 
ephemeris data for that SV, and collects almanac data for all SVs in the constellation. 
The Z-Max will begin recording satellites automatically as soon as 3 satellites are 
tracked and will be computing a position when 4 satellites are tracked.
Each SV broadcasts information about its own position every 30 seconds (ephemeris) 
and information about the position of every satellite in orbit every 15 minutes 
(almanac). The unit automatically records this information in its memory. The unit has 
an L1/L2-band RF port and 3 external input/output ports that include RS-232, RS-422 
and USB protocol. The receiver also contains an internal Bluetooth wireless module 
for wireless communication between the receiver and peripheral devices. The 
receiver contains an internal serial interface for interfacing with the Communication 
Module.

G3.book  Page 3  Saturday, May 24, 2003  12:52 PM

Содержание Z-Max



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z-Max

Garmin Astro Getting Started Manual preview
Astro
Бренд: Garmin Страницы: 2
Navman Tracker 5505 Installation And Operation Manual preview
Tracker 5505
Бренд: Navman Страницы: 68
GPS.AT Iridium Tracker Installation Manual preview
Iridium Tracker
Бренд: GPS.AT Страницы: 9
Navigon 33xx User Manual preview
33xx
Бренд: Navigon Страницы: 80
Cal Amp LMU-2 30 Series Hardware And Installation Manual preview
LMU-2 30 Series
Бренд: Cal Amp Страницы: 66
Garmin 16X LVS Technical Specifications preview
16X LVS
Бренд: Garmin Страницы: 37
Navman 2006 SE Manual Del Usuario preview
2006 SE
Бренд: Navman Страницы: 144
Magellan GPS 3000 User Manual preview
GPS 3000
Бренд: Magellan Страницы: 82
Eddy Wireless EDW-310BB User Manual preview
EDW-310BB
Бренд: Eddy Wireless Страницы: 21
Ubiquiti arFber AF-5XHD Quck Start Gude preview
arFber AF-5XHD
Бренд: Ubiquiti Страницы: 29
Garmin DezlCam Series Manual preview
DezlCam Series
Бренд: Garmin Страницы: 7
LG N10 Owner'S Manual preview
N10
Бренд: LG Страницы: 54
LG N11 Owner'S Manual preview
N11
Бренд: LG Страницы: 48
Xirgo FMS500 TACHO SDK User Manual preview
FMS500 TACHO SDK
Бренд: Xirgo Страницы: 14
MeiTrack MT88 User Manual preview
MT88
Бренд: MeiTrack Страницы: 5
UniGuard GT06L User Manual preview
GT06L
Бренд: UniGuard Страницы: 6
Garmin GPS 158 Owner'S Manual preview
GPS 158
Бренд: Garmin Страницы: 16
Flex TT603 Installation Manual preview
TT603
Бренд: Flex Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды