manualshive.com logo in svg

Thales Z-Max, Руководство по эксплуатации и применению

Magellan Z-Max - ваш надежный путеводитель в путешествиях! Получите инструкцию по эксплуатации "Getting Started" для вашего устройства совершенно бесплатно. Скачайте ее с manualshive.com. Начните пользоваться всеми возможностями продукта уже сегодня!

Поделиться
Скачать
background image

v

 

THALES NAVIGATION PROFESSIONAL PRODUCTS LIMITED WARRANTY

(Europe, Middle East, Africa)

All Thales Navigation global positioning system (GPS) receivers are navigation aids, and are not 
intended to replace other methods of navigation.  Purchaser is advised to perform careful position 
charting and use good judgment.  READ THE USER GUIDE CAREFULLY BEFORE USING THE 
PRODUCT.

1. THALES NAVIGATION WARRANTY

Thales Navigation warrants their GPS receivers and hardware accessories to be free of defects in 
material and workmanship and will conform to our published specifications for the product for a period 
of one year from the date of original purchase or such longer period as required by law. THIS 
WARRANTY APPLIES ONLY TO THE ORIGINAL PURCHASER OF THIS PRODUCT. 

In the event of a defect, Thales Navigation will, at its option, repair or replace the hardware product 
with no charge to the purchaser for parts or labor. The repaired or replaced product will be warranted 
for 90 days from the date of return shipment, or for the balance of the original warranty, whichever is 
longer.  Thales Navigation warrants that software products or software included in hardware products 
will be free from defects in the media for a period of 30 days from the date of shipment and will 
substantially conform to the then-current user documentation provided with the software (including 
updates thereto).  Thales Navigation's sole obligation shall be the correction or replacement of the 
media or the software so that it will substantially conform to the then- current user documentation.  
Thales Navigation does not warrant the software will meet purchaser's requirements or that its 
operation will be uninterrupted, error-free or virus-free.  Purchaser assumes the entire risk of using the 
software.

2. PURCHASER'S REMEDY

PURCHASER'S EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR ANY IMPLIED 
WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT, AT THALES 
NAVIGATION'S OPTION, OF ANY DEFECTIVE PART OF THE RECEIVER OR ACCESSORIES 
WHICH ARE COVERED BY THIS WARRANTY. REPAIRS UNDER THIS WARRANTY SHALL ONLY 
BE MADE AT AN AUTHORIZED THALES NAVIGATION SERVICE CENTER. ANY REPAIRS BY A 
SERVICE CENTER NOT AUTHORIZED BY THALES NAVIGATION WILL VOID THIS WARRANTY.

3. PURCHASER'S DUTIES

To obtain service, contact and return the product with a copy of the original sales receipt to the dealer 
from whom you purchased the product.

Thales Navigation reserves the right to refuse to provide service free-of-charge if the sales receipt is 
not provided or if the information contained in it is incomplete or illegible or if the serial number is 
altered or removed. Thales Navigation will not be responsible for any losses or damage to the product 
incurred while the product is in transit or is being shipped for repair.  Insurance is recommended.  
Thales Navigation suggests using a trackable shipping method such as UPS or FedEx when returning 
a product for service.

4. LIMITATION OF IMPLIED WARRANTIES

EXCEPT AS SET FORTH IN ITEM 1 ABOVE, ALL OTHER EXPRESSED OR IMPLIED 
WARRANTIES, INCLUDING THOSE OF FITNESS FOR ANY PARTICULAR PURPOSE OR 
MERCHANTABILITY, ARE HEREBY DISCLAIMED AND IF APPLICABLE, IMPLIED WARRANTIES 
UNDER ARTICLE 35 OF THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE 
INTERNATIONAL SALE OF GOODS. 

G3.book  Page v  Saturday, May 24, 2003  12:52 PM

Содержание Z-Max



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z-Max

Queclink GV350M Installation Manual preview
GV350M
Бренд: Queclink Страницы: 5
Nextar X4-T Software Manual preview
X4-T
Бренд: Nextar Страницы: 39
Queclink GD100 User Manual preview
GD100
Бренд: Queclink Страницы: 13
Fleet Complete MGS600 Installation Manual preview
MGS600
Бренд: Fleet Complete Страницы: 12
Navibe GM720 Quick Installation Manual preview
GM720
Бренд: Navibe Страницы: 8
UniGuard UM02X User Manual preview
UM02X
Бренд: UniGuard Страницы: 9
Becker BE A00 Operating Manual preview
BE A00
Бренд: Becker Страницы: 155
Trafficmaster Smartnav Quick Start Manual preview
Smartnav
Бренд: Trafficmaster Страницы: 2
S-TEC ST-901 Pilot Operating Handbook preview
ST-901
Бренд: S-TEC Страницы: 34
Becker Highspeed 7934 Operating Instructions Manual preview
Highspeed 7934
Бренд: Becker Страницы: 85
Garmin GPSMAP 60CS Owner'S Manual preview
GPSMAP 60CS
Бренд: Garmin Страницы: 108
Garmin GPS 10 Specification preview
GPS 10
Бренд: Garmin Страницы: 2
TomTom Rider 400 User Manual preview
Rider 400
Бренд: TomTom Страницы: 153
TomTom PRO 82 SERIES User Manual preview
PRO 82 SERIES
Бренд: TomTom Страницы: 158
GB Instruments LAN-Tracker GET-4220K Instruction Manual preview
LAN-Tracker GET-4220K
Бренд: GB Instruments Страницы: 30
B.O.L.T BT4 User Manual preview
BT4
Бренд: B.O.L.T Страницы: 51
Haicom HI-406BT-C User Manual preview
HI-406BT-C
Бренд: Haicom Страницы: 32
QRP Labs U4B Ultimate4 Operating Manual preview
U4B Ultimate4
Бренд: QRP Labs Страницы: 55

Бренды по названию

Популярные бренды

Загрузить еще бренды