TERSUS AG960, Руководство пользователя

Страница: 8 / 168

7 / 167
Figure 40 Installation of 3G antenna .............................................................................................. 32
Figure 41 Connect the round plate knob and the rectangle knob with the link rod ........................ 33
Figure 42 Panel computer properly installed.................................................................................. 33
Figure 43 Installation orientation of autopilot should be parallel to the vehicle (CORRECT) ...... 34
Figure 44 Installation orientation of autopilot should be parallel to the vehicle (WRONG).......... 34
Figure 45 Connect the autopilot and the adapter plate with cross countersunk screws .................. 35
Figure 46 Proper installation position in the driving cab ............................................................... 35
Figure 47 Fix the adapter plate to the installation surface with self-tapping screws and electric tool
................................................................................................................................................ 35
Figure 48 Coaxial steering sensor .................................................................................................. 36
Figure 49 Coaxial steering sensor bracket ..................................................................................... 36
Figure 50 Tractor knuckle and suitable sensor seat ........................................................................ 37
Figure 51 Assemble steering sensor and sensor flanged base ........................................................ 37
Figure 52 Remove the screws on the knuckle flange with a socket spanner .................................. 38
Figure 53 Place the assembled steering sensor onto the knuckle flange and secure it with original
screws ..................................................................................................................................... 38
Figure 54 Bend the sensor stop plate downward ............................................................................ 39
Figure 55 Adhere double faced adhesive tape to the lower part of the double cross stop frame (left)
and bend the stop frame upward (right) ................................................................................. 39
Figure 56 Connect the sensor stop plate and double cross stop frame and fix them with screws .. 39
Figure 57 Remove the protective film of the double faced adhesive tape and press the double
cross stop frame against the front axle ................................................................................... 40
Figure 58 Wrap the anchor ear with rubber strip ............................................................................ 40
Figure 59 Bind and lock the double cross stop plate with anchor ear ............................................ 41
Figure 60 Coaxial steering system installed ................................................................................... 41
Figure 61 Components of parallelogram steering system .............................................................. 42
Figure 62 Installation sketch of parallelogram steering system (viewing from cross section of
tractor front axle).................................................................................................................... 43
Figure 63 Fix U-shaped threaded rod and fish plate to the toe-in .................................................. 43
Figure 64 Fix the clamping plates to the front axle with a M12 threaded rod ................................ 44
Figure 65 Fix sensor assembly at the long clamping plate side ..................................................... 44
Figure 66 Install cardan joint connecting rod ................................................................................. 45
Figure 67 Install cardan joint connecting rod ................................................................................. 45
Figure 68 Connection diagram of open center hydraulic system ................................................... 46
Figure 69 Installation positions of transition unions on the hydraulic valve .................................. 49
Figure 70 Hydraulic valve (left) and transition unions (right) ....................................................... 50
Figure 71 Install the transition unions to corresponding ports on the hydraulic valve ................... 50
Figure 72 Determine the connection position of L-shaped adapter plate on tractor (left), hang and
tighten hydraulic valve (right) ................................................................................................ 51
Figure 73 Disconnect existing connection at port P of power steering pump, mount transition
union, and connect it to port P of hydraulic valve with oil pipe ............................................. 51
Figure 74 Ports P, T, L (A), R (B) of steering gear ......................................................................... 52
Figure 75 Disconnect existing connection at ports L/R/T of steering gear, connect a tee union, and
then connect it to ports L/R/T of hydraulic valve ................................................................... 52