25
/
167
Figure 23 Press the antenna to specified position with force
Figure 24 Slightly pull the antenna to check if it is securely fixed
Figure 25 Apply waterproof sealant to the gap between antenna pedestal and vehicle top
4.1.1.3
Route Antenna RF Cable
After the satellite navigation antenna is installed, route the 3M RF cable. One end of
the 3M RF cable is connected to the RF connector of the satellite navigation antenna
with a threaded connection. Tighten it with hand instead of pliers or other tools to
avoid damage to the RF connector of the antenna or the RF cable connector. After it is
tightened, wrap and seal it with insulating tape. Route the cable along the driving cab
top and fix it with cable tie holder with double-faced adhesive tape. Two 3M RF
cables should be neatly routed in a symmetrical way along the driving cab top and
