88
/
167
Figure 119 Setting screen
The sub-screen “System” shows the unique ID number of the AG960 and the name of
every main components and assemblies, followed by corresponding pull-down menu
for model selection. With modular design, AG960 can easily select GNSS high
precision board card, data transfer radio module, inertial sensor, steering actuator and
steering measuring mechanism etc. from different manufacturers so as to provide
personalized and customized products for the distributors and users.
Each autopilot is provided with a unique ID number when delivered and neither the
technical support nor the user has authorization to reset the ID number.
Except in some special cases, each autopilot has completed the setting of models of
components and assemblies when delivered. Neither the technical support nor the user
needs to reset models except for “RTK data source”.
The setting of RTK data source is used to select the source of differential reference
information required for centimeter-level high precision positioning of autopilot and
the options available are internal radio, external radio and CORS network.
5.4.1.1
RTK Data Source
If internal radio of Autopilot (Controller) is used (as in most applications), select
“433MHz radio (internal)” as “RTK data source” and now the lower part of the
sub-screen “System” will display setting options of internal radio. Set “Channel” at
the pull-down menu to current transmitting channel number used by the reference
