98
/
167
boxes. Touch the button “Save” to finish the setting of machine. Meanwhile the
license plate number can be entered to facilitate the management. In addition, if the
machine installed can be found in the pull-down menu of “Vehicle models”, it is
unnecessary to measure the parameters. In such cases, the machine setting can be
completed by directly selecting the specific model of the machine.
5.4.5
Implement Setting
When the “Vehicle setting” is completed, touch the button “Implement setting”
at the upper part of the Setting screen to enter the sub-screen “Implement
setting” as shown in the figure below.
Figure 133 Sub-screen “
Implement
setting”
In the sub-screen “Implement setting”, fill each measured parameter of the farm tool
in the number box to finish the implement setting as below.
The longitudinal distance from the implement to the hanging point
The lateral shift of implement
The operation width of implement
The operation width overlap of implement
The number filled into every number box is in meters. When all numbers are entered,
touch “Save” button to save the implement parameters.
