41
/
167
Figure 59 Bind and lock the double cross stop plate with anchor ear
4.2.1.6
Bind Steering Senor Cable
Figure 60 Coaxial steering system installed
4.2.1.7
Check the Motion of the Steering System
After the device is installed, start the engine, repeatedly turn the guide wheel to the
left and right side to the maximum extent with vehicle staying at the same location
and observe the coaxial steering system. Make sure that during the wheel rotation, the
steering system does not interference with or impact on the oil tubing mechanism (in
particular, the sensor stop plate should have no contact with the bottom plate flange
and screws), the sensor seat can turn freely along with the knuckle and the sensor
