20
/
167
2)
The secondary antenna of the satellite navigation antenna is connected to the
“GNSS secondary antenna” port of the front panel of navigation autopilot through
a 3M RF cable.
3)
The radio receiving antenna is connected to the “radio antenna” port of the front
panel of navigation autopilot through a 3M RF cable.
4)
Each end of the data harness (white end harness) is respectively connected to the
Autopilot (Controller) and the panel computer.
5)
One end of the drive harness (black end harness) is connected to the Autopilot
(Controller) and the other end is divided into three lines each of which is
respectively connected to vehicle battery, electromagnetic hydraulic valve and
steering measuring mechanism.
4
Installation of AG960
In this chapter, it takes Dongfanghong (a tractor brand name) 904 tractor (open center
type, medium-duty), John Deere 904 tractor (open center type, medium-duty) and
Case 210 tractor (closed center type, heavy-duty) as examples to describe the process
of installing the AG960 onto the agricultural vehicles.
The process of installing AG960 can be divided into 4 steps:
1)
Install electronic components
2)
Install the steering measuring mechanism
3)
Install the hydraulic valve group
4)
Lay the harness
Step 1, 2 and 3 has no specific order and can be completed by different installation
personnel at the same time before laying the harness as step 4.
Tools required for the installation of AG960 are listed in the table below.
Table 2 Tools required for installing AG960
Item
Description
Spec.
Qty.
Remarks
1.
No-adjustable wrench
1 set
2.
Adjustable wrench
2 pcs.
3.
Inner hexagon spanner (Metric
system)
1 set
4.
Inner hexagon spanner
(Imperial system)
1 set
