130
/
167
5.5.7.3
Agriculture Machine Deviation Calibration – Step 3
Drive along Line AB for a round trip. When leaving, stop the tractor in the middle
location of Line AB to make marks on the ground near the left and right edge of rear
wheels and then continue driving. When returning, stop the vehicle at the same
location to make marks in the same way. When all this is done, touch “Next” to go to
Step 4.
Figure 171 Step 3: automatically drive along Line AB for a round trip and make marks for tyres
5.5.7.4
Agriculture Machine Deviation Calibration – Step 4
Based on the relative position of marks that made in a round trip, i.e. marks made in
the returning trip (the second trip) are at the left or right side of that made in the
leaving trip (the first trip), and select the right picture in the screen.
