40
/
167
4.2.1.5
Fix the Double Cross Stop Frame
Fix the double cross stop plate to vehicle front axle with anchor ear and rubber strip.
First remove the protective film of the double faced adhesive tape on the lower part of
the double cross stop frame and adhere it to the corresponding position on front axle
to prevent stop frame from moving during locking the anchor ear. Then bind and lock
it with the anchor ear. During binding, please note that the anchor ear should pass the
spacing slot on the double cross stop plate. Lock the anchor ear adequately with a
straight screwdriver to prevent the double cross stop plate from moving or loosening
during the operation and bumping of the tractor.
Figure 57 Remove the protective film of the double faced adhesive tape and press the double cross
stop frame against the front axle
Figure 58 Wrap the anchor ear with rubber strip
