Telstar Bio II Advance, Руководство пользователя

Страница: 68 / 229

UM-BIOIIADVANCE-EN-1302 33
No. Type of
error
Causes of error Correction of error
8
Open
frontal
Alarm
“
WINDOW
OPEN
” (see
Chapter 4.5
pto. D)
Frontal contact is damaged
Slide down the glass to closed position and
check that the frontal contact is not loose
and remove any type of obstruction.
Notify the Technical Service to receive
instructions for adjusting the contact.
Main control is damaged
Call a specialised technician to replace the
control.
9
Light does
not turn on
Light not working properly
Check that the connection in the control
card is correct (
Annex A7
).
Fluorescent lights not
working
Slightly turn the fluorescent light to ensure
good contact.
Change the fluorescent bulb.
Ballast is damaged Change the ballast.
10
UV
germicidal
lamp does
not turn on
(optional
accessory)
Glass not in closed position Check the front slides properly.
UV lamp does not work
Check the lamp holder is connected
properly.
Check that the connection in the control
card is correct (
Annex A7
).
Change the UV lamp.
Ballast is damaged Change the ballast.
11
Intermittent
alarm
activated
Front position security
micro activated
Open the front and check the security
micro is not loose.
Call the Technical Service to receive
instructions on adjusting micros.
Main control is damaged
Call a specialised technician to replace the
control.
12
Display
does not
turn on
Power cord cable
disconnected
Check that power cord cable is properly
connected in cabinet and in socket on the
wall.
No power Check voltage on the socket of the wall.
Main control is damaged
Call a specialised technician to replace the
control.
WARNING
All repair and maintenance work in the cabinet should be done by qualified technical staff
with knowledge about the maintenance procedures required by the cabinet.