Getting Started
1Ć6
DG2030 User Manual
Installation
Before installation, refer to the Safety Summary at the front of this manual for
power source, grounding, and other safety information.
Before you use the instrument, ensure that it is properly installed and powered
on. To properly install and power on the instrument, perform the following steps:
1. Check that the operating environment is correct.
The DG2030 operates correctly in ambient temperatures from +10
_
C to
+40
_
C and relative humidity from 20% to 80%. If the instrument is stored
at temperatures outside this usage temperature range, do not switch on the
power until the chassis has come within the operating temperature range. For
more operating environment information, refer to Appendix A, Specifica-
tions.
NOTE
. If you are installing the instrument in the dedicated rack, refer to the
instruction sheet that comes with the rack mounting kit.
2. Before switching on the power, double check that there is nothing blocking
the flow of air at the fan and air intake holes.
the instrument takes in outside air and cools itself by forcibly exhausting air
with the fan on its left side. Leave space at the sides of the instrument so that
the heat generated within the instrument does not build up and harm the
operation. There are holes for air intake on the sides and bottom of the
cabinet. After switching on the power, double check that the fan is turning.
Here are the minimums for the space at the sides of the instrument.
Top and bottom : 2.5 cm (1 inche)
Left and right :
15.0 cm (6 inches)
Rear :
7.5 cm (3 inches)
WARNING.
Always unplug the power cord from the socket before checking the
line fuse.
3. Remove the fuse from the fuse holder on the rear panel and check the fuse.
To remove the fuse, turn it counter-clock-wise with a screwdriver while
pushing it in. There are two types of fuses provided. Here is the fuse type
and rating.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com