Appendix A: Specifications
DG2030 User Manual
AĆ9
Nominal Traits
This section describes the general characteristics of the DG2030. These are
divided into two main categories: Table A-6 Electrical Characteristics and
Table A-7 Mechanical Characteristics.
Table AĆ6: Nominal traits Ć electrical characteristics
Characteristics
Description
Operation mode
Repeat
Pattern data isrepeatedly output. When a sequence isspecified, patternsare repeated
according to the sequence order. The extended sequence functions such as trigger wait, event
jump, etc. are ignored in thismode.
Single
Pattern data is output only once. When a sequence is specified, a trigger signal causes to
perform output according to the sequence order.
Step
Pattern data are output based on the clock, not specified by clock source, but generated by
pressing the
STEP/EVENT
button on the front panel. Thismode isthe same asRepeat mode
except for the clock.
Enhanced
Pattern data is output completely according to a sequence. The all extended sequence
functionssuch astrigger wait, event jump, etc. are valid in thismode. Thismode issame as
Repeat mode except for the extended sequence functions.
Output pattern
Pattern length
90 to 262144 points
Number of channels
Up to 4 for standard and 8 for option 01
Sequence
Maximum 4000 steps
Number of blocks
Maximum 256
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com