
Edit Menu
3Ć28
DG2030 User Manual
Changes the name of the block at the current cursor position.
Operation.
Change a block name
Bottom button
Popup menu
Side button
Move the knob icon to the Cursor window in the upper left of the screen.
Move the cursor to the block whose name is to be changed.
Block
Select Rename current block
.
OK
Clear String
Enter the new block name.
OK
Changes the size of the block at the current cursor position. The size of other
blocks is not changed; the memory size is changed.
When increasing the size of the current block, only set a size that does not cause
the total number of points to exceed the maximum memory size. Zero data
corresponding to the increase in size is added at the end of the block.
When decreasing the size of the current block, data is deleted from the end of the
block.
Note that the range of allowable block sizes starts at a minimum size of
90 points.
NOTE
. Changing the block size cannot be reversed with the Undo operation.
Block 1
Block 1
Block 2
Block 3
Block 3
Block 2
90 Pointsor Over
Before Change a
Block Size
After Change a
Block Size
Current Cursor Position
Figure 3Ć16: Change a block size
Rename Current Block
Resize Current Block
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com