Tektronix 6 series, Печатная инструкция

Страница: 224 / 518

See also.
Bus Trigger configuration on page 342
Bus Search configuration menus on page 230
LIN serial bus configuration menu
Use this menu (optional) to set up and display a LIN (Local Interconnect Network) serial bus waveform.
To set up the LIN serial bus:
■
To create a new LIN bus waveform, tap the Add New Bus button on the Settings bar. Open the bus configuration menu by
double clicking on the badge. Set the Bus Type to LIN.
■
To change the settings on an existing LIN serial bus waveform, double-tap the LIN Bus waveform badge and make
necessary changes.
LIN serial bus menu fields and controls.
Field or control Description
Display Turns on or off displaying the bus on the Waveform view.
Label
Enter a label for the bus. The default label is the selected bus type.
To enter label text, double-tap the field and enter label using the virtual keyboard, or tap the
field and enter text from an attached keyboard.
Position Sets the vertical position of the bus waveform. The default position is vertically centered in a
slice (in Stacked mode), or center screen in Overlay mode. The unit of position is screen
divisions.
Set to 0 Sets the vertical position to 0 divisions (centered vertically in a slice or on the screen.
Bus Type Set to LIN.
Source Set the signal source from available analog or digital channels.
Threshold Set the threshold level to define a logic high level.
Polarity Select the polarity to match the LIN bus being acquired.
LIN Standard Select the standard to match the LIN bus being acquired.
Bit rate
Sets the bit rate.
To enter a custom bit rate, tap Custom and enter the custom bit rate in the Custom Rate input
box.
Include Parity Bits with ID Set to Yes to include parity bits with the ID.
Sample Point Sets the sample point from 5% to 95% of the position within the bit period or the unit interval.
Display Format Sets the waveform view to show just the decoded bus information, or the decoded bus plus the
source signal waveforms.
Decode Format Sets the decode format used to display the bus information. Formats are Hex, Binary, and
Mixed.
Menus and dialog boxes
204 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help