Tabor Electronics 5064, Руководство пользователя

Страница: 203 / 369

2074
User Manual
4-58
your waveform, the Save As… command will be invoked
automatically, letting you select name, location and format for your
waveform file.
Save As…
Use the Save As… command the first time you save your
waveform. It will let you select name, location and format for your
waveform file.
Print
With this command you may print the active Pulse Window. The
standard printer dialog box will appear and will let you select printer
setup, or print the waveform page.
Exit
The Exit command ends the current Pulse Composer session and
takes you back to the Panels screen. If you made changes to your
waveform since it was last saved, the Wave Composer will prompt
you to Save or Abandon changes these changes.
Edit Commands The Edit commands are used for adding or removing pulse train
sections. Use these commands to Append, Delete, Insert, or Undo
last operation. The editing commands are explained in the following
paragraphs.
Append Section
The Append Section command lets you append a new section at
the end of the pulse train. Only one new section can be appended
at the end of the train. If an empty section already exists, the
append command will alert for an error. New sections are always
appended at the end of the pulse train.
Insert Section
The insert Section command lets you insert a new section in
between sections that were already designed. Only one new
section can be inserted at the middle of the train. If an empty
section already exists, the insert command will alert for an error.
Delete Section
The Delete Section command lets you remove sections from the
pulse train without affecting the rest of the train. If you use this
command from the Edit menu, make sure that the section you want
to remove is currently the active section.
Remove all Sections
The Remove all Sections command lets you remove the entire
pulse design from the pulse screen and start from a fresh page.
Undo
The Undo command undoes the last editing operation. This
command is extremely useful in cases where you unintentionally
delete a section from the pulse train and want to restore it to the
screen.