Tabor Electronics 5064, Руководство пользователя

Страница: 362 / 369

Appendix A
Specifications
Note
Except where noted, the specifications are the same for
models WW5064, WW1074 and 2074
Configuration
Output Channels 4, semi-independent
Inter-Channel Dependency
Separate controls Output on/off, amplitude, offset, filters, standard
waveforms, user waveforms and size, sequence
table.
Common Controls Sample clock, frequency, reference source, run
modes and SYNC output
Leading Edge Offset
Description Channel 1 waveform used as start reference,
channels 2, 3 and 4 can be offset by a
programmable number of points. Channels 3 and 4
must have the same duration in one of the
following run modes: Triggered, Burst, or gated
Jitter Between Channels 0 ps
Offset Units Waveform points
Range 0 to
±
2 M points, each channel in reference to
channel 1
Resolution and Accuracy 1 point, channel 1/2; 4 points, channels 3/4
Skew
±
(1 SCLK +1 ns) (50 Ω cables, equal length) between
channels; 1 ns between channels 3 and 4
Multiple Instruments Synchronization
Description Multiple instruments can be connected together
and synchronized to provide multi-channel
synchronization. Phase (leading edge) offset
between master and slave units is programmable.
Leading Edge Offset
Description Leading edge is programmable in reference to an
adjacent unit
Offset Units Seconds
Range 200 ns to 20 s
Resolution and Accuracy 20 ns
Initial Skew <
±
(15 ns + 1 sample clock cycle) between adjacent
instruments, depending on cable length and quality,
A-1