Tabor Electronics 5064, Руководство пользователя

Страница: 236 / 369

E
r
r
o
r
!
B
o
o
k
m
a
r
k
n
o
t
5-15
INSTrument{1|2|3|4|..n}(?)
Description
This command will set the active channel for future programming sequences. Subsequent commands
affect the selected channel only.
Parameters
Range Type Default Description
1-4 (5 - n)
Discrete
1 Sets the active channel for programming from remote.
Channels 1, 2, 3 and 4 are associated with the 2074.
Channels 5 and subsequent channels are available only
when the 2074 operate in master/slave mode and was
coupled to other instruments. The channel designator is
automatically adjusted to the number of channels that are
joined to form the multi-channel system, regardless if
2074 or 2571A/2A units are used in this system
Response
The 2074 will return 1, 2, 3, 4, or n depending on the present active channel setting
INSTrument:COUPle:MODE{MASTer|SLAVe}(?)
Description
This command will assign master or slave properties to the instrument. If the assignment is slave, most of
the instrument operational functions will be controlled from the master instrument however, waveforms,
amplitudes and offsets can be controlled individually for each slave unit.
Parameters
Name Type Default Description
MASTer Discrete MAST Programs a specific 2074, in a multi-instruments
system, as master instrument. Note that only one
instrument can be designated as master while all
other instruments must be programmed as slaves.
SLAVe Discrete Programs 2074
’s, in a multi-instruments system, as
slave instrument. Note that multiple instruments can
be designated as slaves but only one instrument can
be designated as master.
Response
The 2074 will return MAST or SLAV depending on current instrument couple mode assignment.
INSTrument:COUPle:DELay<delay>(?)
Description
This command will assign master or slave properties to the instrument. If the assignment is slave, most of