Tabor Electronics 5064, Руководство пользователя

Страница: 289 / 369

5-68
Parameters
Name Range Type Default Description
<freq> 10e-3 to
1e6 Numeric 1e6 Will set the frequency of the half cycle waveform in
units of Hz. This parameter does not affect the
frequency of other waveform functions.
Response
The 2074 will return the present half cycle frequency value. The returned value will be in standard scientific
format (for example: 100mHz would be returned as 100e-3
– positive numbers are unsigned).
AUXiliary:HALFcycle:PHASe<phase>(?)
Description
This command programs the start phase of the half cycle sine and triangle waveform. This command has
no affect on other waveform functions.
Parameters
Name Range Type Default Description
<phase> 0 to 360 Numeric 0 Programs the start phase parameter for the half cycle
sine and triangle waveforms in units of degrees. The
phase can be programmable with resolution of 0.05

throughout the entire frequency range of the half
cycle function.
Response
The 2074 will return the present start phase value.
AUXiliary:HALFcycle:SHAPe{SINusoid|TRIangle|SQUare}(?)
Description
This command defines the type of half cycle waveform that will be available at the output connector.
Parameters
Name Type Default Description
SINusoid Discrete SIN Selects the half cycle sine waveform.
TRIangle Discrete Selects the half cycle triangular waveform.
SQUare Discrete Selects the half cycle square waveform.
Response
The 2074 will return SIN, TRI, or SQU depending on the present 2074 setting