Tabor Electronics 5064, Руководство пользователя

Страница: 238 / 369

E
r
r
o
r
!
B
o
o
k
m
a
r
k
n
o
t
5-17
INSTrument:COUPle:STATe{OFF|ON|0|1}(?)
Description
This command will turn the 2074 couple state on and off.
Parameters
Range Type Default Description
0-1 Discrete 0 Sets the couple mode on and off. Note that this
command must be applied to the master instrument only
otherwise, the couple state will not be affected. To select
the master instrument use the INST:SEL 1 command.
Response
The 2074 will return 1 if the couple state is on, or 0 if the couple state is off.
OUTPut:LOAD<load>
Description
This command will specify the load impedance that will be applied to the 2074 output.
Parameters
Name Type Default Description
<load> Numeric
(integer only) 50 Will specify the load impedance that will be applied to
the 2074 outputs in units of

. The default setting is
50

. The range of load impedance is 50

to 1
M

..Accurate setting of the load impedance is crucial
for correct display readout of the amplitude level on
the load.
OUTPut{OFF|ON|0|1}(?)
Description
This command will turn the 2074 output on and off. Note that for safety, the outputs always default to off,
even if the last instrument setting before power down was on
Parameters
Range Type Default Description
0-1 Discrete 0 Sets the output on and off
Response
The 2074 will return 1 if the output is on, or 0 if the output is off.