Tabor Electronics 5064, Руководство пользователя

Страница: 183 / 369

2074
User Manual
4-38
with an additional list of commands. Then, clicking on an additional
command, may open a dialog box, or generate an immediate
action. For example, Clicking on File and then Exit will cause an
immediate termination of the Wave Composer. On the other hand,
clicking on Wave and then on Sine, will open a Sine Wave dialog
box that lets you program and edit sine wave parameters. The
various commands in the Commands bar are listed and described
below.
File Commands The File command has 4 command lines that control waveform
files. Also use this command to print the active waveform, or exit
the wave composer program. Description of the various commands
under File is given below.
New Waveform
The New Waveform (Ctrl+N) command will remove the waveform
from the screen. If you made changes to the waveform area and
use the New Waveform command, you should save your work
before clearing the screen. The New Waveform command is
destructive to the displayed waveform.
Open Waveform…
The Open Waveform… (Ctrl+O) command will let you browse your
disk for previously saved waveform files and load these waveforms
to the waveform area. This command is also very useful for
converting waveform files to format that is acceptable by the Wave
Composer. The Open Waveform command can convert ASCII.
*CSV (comma delimited text), *PRN (space delimited text) and *.0*
(LeCroy binary format). The Open dialog box in Figure 4-31 shows
the various file extensions that can be opened into the Wave
Composer environment. The file that is opened is automatically
converted to *.wav format and can later be saved as a standard
ArbConnection file.
Save Waveform
The Save Waveform (Ctrl+S) command will store your active
waveform in your 2074 directory, as a binary file with an *.wav
extension. If this is the first time you save your waveform, the Save
Waveform As… command will be invoked automatically, letting you
select name, location and format for your waveform file.
Save Waveform As…
Use the Save Waveform As… command the first time you save
your waveform. It will let you select name, location and format for
your waveform file.
Print
With this command you may print the active Waveform Window.
The standard printer dialog box will appear and will let you select