Tabor Electronics 5064, Руководство пользователя

Страница: 264 / 369

E
r
r
o
r
!
B
o
o
k
m
a
r
k
n
o
t
5-43
TIP
Every time you use the SEQ:DEF command while your 2074 is in sequenced
operating mode, the instrument attempts to rebuild the sequence table and
restart the sequence. Therefore, sending this command in sequenced mode
will slow the programming process and the operation of the generator. Using
the SEQ:DEF command in FIX or USER mode will greatly speed up
programming time.
SEQuence:DELete<sequence_number>
Description
This command will delete a step in a specific sequence table. Before you use this step make sure your
sequence number is setup correctly for this operation.
Parameters
Name Range Type Default Description
<sequence_
number> 1 to
4096 Numeric
(integer only) 1 Selects the step number of which will be deleted
SEQuence:DELete:ALL
Description
This command will delete the enire sequence table. Before you use this step make sure your sequence
number is setup correctly for this operation.
OUTPut:SYNC:TYPE{BIT|LCOMplete}(?)
Description
This command will program the 2074 SYNC mode.
Parameters
Name Type Default Description
BIT Discrete The sync output will generate a pulse at the
beginning of a specific segment regardless how many
times the segment appears in a sequence. The width
of the sync pulse is 16 waveform points.
LCOMplete Discrete LCOM The sync output will transition high at the beginning of
the sequence and will transition low at the end of the
sequence, less 16 waveform points.
Response
The 2074 will return BIT or LCOM depending on the present SYNC mode