Standard Horizon GX2400GPS, Руководство пользователя

Страница: 22 / 148

20
8.5.3 Internal GPS (DSC Output) to Chart Plotter
GPS Chart Plotter Plotter Connection Radio Wires
No Connection
No Connection
NMEA IN (+)
NMEA-HS IN (+)
NMEA IN ( − )
NMEA-HS IN ( − )
White: NMEA OUT (+)
Brown: NMEA OUT (
− )
Blue: NMEA-HS OUT (+)
Gray: NMEA-HS OUT (
− )
Yellow: NMEA IN (+)
Green: NMEA IN (
− )
Wire Color/Description Connection Examples
YELLOW - NMEA GPS Input (+) No connection
GREEN - NMEA GPS Input (−) No connection
WHITE - NMEA DSC Output (+) NMEA (+) input of GPS*
1
BROWN - NMEA DSC Output (−) NMEA (−) input of GPS*
1
BLUE - AIS Data Output (+) NMEA-HS (+) input of AIS receiver*
2
GRAY - AIS Data Output (−) NMEA-HS (−) input of AIS receiver*
2
*1: 4800 baud, *2: 38400 baud
NOTE : Some GPS chart plotters have a single wire for NMEA signal ground. In this case,
connect the NMEA input (−) to the GPS chart plotter’s single NMEA signal ground wire, and
leave the NMEA output (−) open. In case the assignment of power supply and ground of a
GPS chart plotter to be used is different from that of the radio, connect the signal ground
wire of the GPS chart plotter to the ground terminal (GND) on the rear panel of the radio.
8.5.4 Connection to External GPS or Chart Plotter
GPS Receiver Plotter Connection
NMEA OUT ( −
)
NMEA OUT (+)
NMEA IN (+)
NMEA-HS IN (+)
NMEA IN ( −
)
NMEA-HS IN ( − )
Radio Wires
White: NMEA OUT (+)
Brown: NMEA OUT (
−
)
Blue: NMEA-HS OUT (+)
Gray: NMEA-HS OUT (
− )
Yellow: NMEA IN (+)
Green: NMEA IN (
−
)
Wire Color/Description Connection Examples
YELLOW - NMEA GPS Input (+) NMEA (+) output of GPS*
1
GREEN - NMEA GPS Input (−) NMEA (−) output or common ground of GPS*
1
WHITE - NMEA DSC Output (+) NMEA (+) input of GPS*
1
BROWN - NMEA DSC Output (−) NMEA (−) input of GPS*
1
BLUE - AIS Data Output (+) NMEA-HS (+) input of AIS receiver*
2
GRAY - AIS Data Output (−) NMEA-HS (−) input of AIS receiver*
2
*1: 4800 baud ,*2: 38400 baud
NOTE : To input the GPS coordinates from an external GPS device to the transceiver,
the NMEA GPS input (+) (yellow) and the NMEA GPS input (-) (green) wires may be
connected to the NMEA output of the external GPS antenna or GPS chart plotter.
To connect with an external device at 38400 baud
To connect with an external device at 38400 baud, the transceiver may be setup
to receive GPS coordinates and send DSC signals at 38400 baud. Refer to
section “ 19.9 NMEA 0183 IN/OUT ” for details.