Standard Horizon GX2400GPS, Руководство пользователя

Страница: 73 / 148

71
4. The radio will show the vessels programmed in the indi -
vidual directory. Rotate the DIAL/ENT knob to select
the desired vessel, then press the [ ENTER ] soft key.
5. For more entries, rotate the
DIAL/ENT
knob to select a
blank row, press the [ SELECT ] soft key, then perform
step 4.
6. When finished, press the [ CLEAR ] key to exit to the
radio mode.
11.8.4 Enabling/Disabling Auto POS Polling
1.
[ ]

“ DSC CALL ”

“ AUTO POS POLLING ”
2. Rotate the DIAL/ENT knob to select “ ACTIVATION ”,
then press the [ SELECT ] soft key.
3. Rotate the DIAL/ENT knob to select “ START ” to
enable transmissions or “
STOP
” to disable, then press
the [ ENTER ] soft key.
4. Press the [ CLEAR ] key to return to radio operation.
5. Auto POS Polling starts and the “ ” icon will appear
on the display.
11.9 DSC TEST
This function is used to contact another DSC equipped vessel to ensure the
DSC functions of the radio are operating.
NOTE
To use the DCS Test feature, a radio that is to receive the test call also needs
to have the DSC Test feature.
To perform the DSC test you will need to enter the MMSI of another vessel into
the individual directory or manually enter the MMSI using the procedure below.
11.9.1 Programming MMSI into Individual Directory
Refer to section “ 11.4.1 Setting up the Individual / Position Call Directory ”.