49
Canceling a Distress Alert
If a distress alert was sent by error, the
transceiver
allows you to send a message
to other vessels to cancel the distress alert that was made.
1. Press the [
CANCEL
] soft key, then press the [
YES
]
soft key.
2. After the message for canceling has been transmitted,
press the [
OK
] soft key.
3. Press the [
FINISH
] soft key.
4. Press the [
QUIT
] soft key to return to radio operation.
11.2.2 Receiving a Distress Alert
1. When a distress alert is received, an emergency alarm
sounds.
2. Press any key to stop the alarm.
3. Rotate the
DIAL/ENT
knob to show information on
the vessel in distress.
On the display you will notice 3 soft key selections.
These selections are described below:
[
ACCEPT
]: Press this key to accept the distress alert and switch to Channel 16.
NOTE
: If a key is not pressed within 30* seconds the radio will automatically switch
to Channel 16. *(“
AUTO CHANNEL CHANGE
” timer settings can be changed in
“DSC SETUP” menu. The default setting is 30 sec.)
[
PAUSE
]: Press this key to temporarily pause automatic switching to Channel 16.
[
QUIT
]: Press this key to end quit the automatic Channel 16 switching and
revert to the last selected working channel.
4. After accepting the call, press the [
TO WPT
] soft
key to set the location of the vessel in distress as a
destination for navigation.
NOTE
: You may change the waypoint name.
Содержание GX2400GPS
Страница 146: ......
