61
3. Rotate the
DIAL/ENT
knob to select the second
number of the MMSI (the first of nine digits is perma
-
nently set to “0”) which you want to contact, then press
the [
SELECT
] soft key to step to the next number.
4. Repeat step 3 to set the MMSI number.
If a mistake is made entering in the MMSI number, press the [◄] or [►]
key to select “←” or “→”, press the [
SELECT
] soft key until the incorrect
character is selected, then perform steps 3 and 4.
5. When finished entering the MMSI number, press the [
FINISH
] soft key.
6. In the INTERSHIP CH list, rotate the
DIAL/ENT
knob
to select the operating channel on which to commu
-
nicate, then press the [
SELECT
] soft key. To select
operating channels from all voice channels, press the
[
MANUAL
] soft key.
7. Press the [
YES
] soft key to transmit the group call
signal.
8. After the group call is transmitted, all the radios in the
group will switch to the designated channel.
9. Listen to the channel to make sure it is not busy, then
press the microphone
PTT
switch to communicate
with all of the vessels in the group.
11.5.3 Receiving a Group Call
1. When a group call is received, the transceiver will
produce a ringing alarm sound.
2. The display shows the group MMSI number.
3. Press any key to stop the alarm.
On the display 3 soft key selections are shown. These
selections are described below:
[
ACCEPT
]: Press this key to accept the group call
and switch to the requested channel.
[
PAUSE
]: Press this key to temporarily pause auto
-
matic switching to the requested channel.
[
QUIT
]: Press this key to exit the automatic channel switching and revert
to the last selected working channel.
Содержание GX2400GPS
Страница 146: ......
