Standard Horizon GX2400GPS, Руководство пользователя

Страница: 38 / 148

36
NOTE
In the default setting, Channel 16 is set as the priority channel. You may
change the priority channel from Channel 16 to another desired channel using
the SETUP menu. Refer to section “ 17.7 PRIORITY CHANNEL ”.
9.11 PRESET CHANNELS: INSTANT ACCESS
10 preset channels can be programmed for instant access. Pressing the
[
PRESET
] soft key activates the user assigned channel bank. If the [
PRESET
]
soft key is pressed and no channels have been assigned, an error beep will
sound.
Before beginning the Instant Access operation, assign the “PRESET” command
into one of the programmable keys, refer to section “ 16.8 SOFT KEYS ”.
9.11.1 Programming
1. Rotate the DIAL/ENT knob to select the channel to
be programmed.
2. Press one of the soft keys.
3. Press the [◄] or [►] key repeatedly, until the
[
PRESET
] soft key is displayed, then press and hold
the [ PRESET ] soft key until the “ P-SET ” icon and
channel number are blinking.
4. Press the [ ADD ] soft key to program the channel into
the preset channel memory. The “ P-SET ” icon will
appear.
5. Repeat steps 1 through 3 to program the desired
channels into the preset channels. Up to 10 channels
can be registered. If you attempt to register the 11th
channel, an error beep will sound.
9.11.2 Operation
1. Press one of the soft keys.
2. Press the [◄] or [►] key repeatedly, then press the
[ PRESET ] soft key to recall the preset channel. The
“ P-SET ” icon will appear on the display.
3. Rotate the DIAL/ENT knob to select the desired preset
channel.
4. Press the [ PRESET ] soft key to return to the last
selected channel. The “ P-SET ” icon will disappear
from the display.