Standard Horizon GX2400GPS, Руководство пользователя

Страница: 109 / 148

107
17.7 PRIORITY CHANNEL
This procedure permits setting a different priority channel to be used when
priority scanning. By default, the priority channel is set to Channel 16.
1.
Press & hold [
]

“ CHANNEL SETUP ”

“ PRIORITY CHANNEL ”
2. Rotate the DIAL/ENT knob to select the desired chan -
nel to be a priority.
3. Press the [
ENTER
] soft key to store the new setting.
4. Press the [
CLEAR
] key to return to radio operation.
17.8 SUB CHANNEL
By default, the sub channel is set to Channel 9. This procedure permits assign -
ing a different sub channel for instant access.
1.
Press & hold [
]

“ CHANNEL SETUP ”

“ SUB CHANNEL ”
2. Rotate the DIAL/ENT knob to select the desired chan -
nel to be a sub channel.
3. Press the [
ENTER
] soft key to store the new setting.
4. Press the [
CLEAR
] key to return to radio operation.
17.9 CHANNEL NAME
When the radio (“Normal”) mode is selected, the display will show a name
under the channel number. This name describes the use of the channel. The
name may be customized the with the below procedure.
Example : CH69 PLEASURE to HOOKUP
1.
Press & hold [
]

“ CHANNEL SETUP ”

“ CHANNEL NAME ”
2. Rotate the DIAL/ENT knob to select the channel to
be named, then press the [ SELECT ] soft key.
3. Press the [◄] or [►] key to select the first letter of the
new channel name.
4. Press the [ SELECT ] soft key to store the first letter of
the name and step to the next letter to the right.
5. Repeat step 3 and 4 until the name is complete. The name can consist of up
to 16 characters, if you do not use all 16 characters, select “→” to move to the
next space. This method can also be used to enter a blank space in the name.