Standard Horizon GX2400GPS, Руководство пользователя

Страница: 37 / 148

35
4. To REMOVE a channel from the list, select the channel then press the
[ MEM ] soft key. The “ ON ” icon of the selected channel will disappear.
5. When you have completed your selection, press the [ CLEAR ] key to return
to radio operation.
To check the channels to be scanned, rotate the DIAL.
ENT knob. The “ MEM ” icon will appear when the memory
channel is displayed.
NOTE : When “ SCAN MEMORY ” is assigned to the soft key, the
memory function switches between ON and OFF each time the
[ MEM ] soft key is pressed.
9.10.3 Memory Scanning (M-SCAN)
1. Set the scan type to “ MEMORY ” in the SETUP menu (refer to “ 9.10.1
Selecting Scan Type ”).
2. Adjust the SQL knob until the background noise disappears.
3. Press one of the soft keys.
4. Press the [ ◄ ] or [►] key repeatedly, then press the
[ SCAN ] soft key. The “ MEM SCAN ” icon appears on
the display. Scanning will proceed from the lowest
to the highest programmed channel number and the
preset channel (described in the next section). Scan -
ning will stop on a channel when a transmission is
received.
The channel number will blink during reception.
5. To stop scanning, press the [ SCAN ] soft key, [ 16/S ] or [ CLEAR ] key.
9.10.4 Priority Scanning (P-SCAN)
1. Set the scan type to “ PRIORITY ” in the SETUP menu (refer to “ 9.10.1
Selecting Scan Type ”).
2. Adjust the SQL knob until the background noise disappears.
3. Press one of the soft keys.
4. Press the [ ◄ ] or [ ► ] key repeatedly, then press the
[ SCAN ] soft key. The “ PRI SCAN ” icon appears
on the display. Scanning will proceed between the
memorized channels, the preset channel (described
in next section) and the priority channel.
The priority channel will be scanned after each programmed channel.
5. To stop scanning, press the [ SCAN ] soft key, [ 16/S ] or [ CLEAR ] key.