Standard Horizon GX2400GPS, Руководство пользователя

Страница: 65 / 148

63
NOTE
The other vessel must have an operating GPS receiver connected to its
DSC radio, and the radio must not be set to deny position requests. (Refer
the section “ 11.4 INDIVIDUAL CALL ” to enter information into the individual
directory).
11.6.1 Setting up a Position Request Reply
The transceiver can be set up to automatically (default setting) or manually send
your position when requested by another vessel. This selection is important if
you are concerned about someone polling the position of your vessel that you
may not want to. In the manual mode you will see the MMSI (Maritime Mobile
Service Identity Number) or persons name shown on the display allowing you
to choose whether or not to send your position to the requesting vessel.
1.
Press & hold [
]

“ DSC SETUP ”

“ POSITION REPLY ”
2. Rotate the DIAL/ENT knob to select “ AUTO ” or
“ MANUAL ”. In “AUTO” mode, after a DSC POS request
is received, the radio will automatically transmit your
vessel’s position. In “MANUAL” mode, the display of
the transceiver will show who is requesting the position
and the [ YES ] soft key on the radio must be pressed
to send your position to the requesting vessel.
3. Press the [ ENTER ] soft key to store the selected setting.
4. Press the [ CLEAR ] key to return to radio operation.
11.6.2 Transmitting a Position Request to Another Vessel
Position Request using the Individual/Position Directory
Refer to section “ 11.4 INDIVIDUAL CALL ” to enter information into the indi -
vidual directory.
1.
[ ]

“ DSC CALL ”

“ POS REQUEST ”
2. Rotate the
DIAL/ENT
knob to select “
HISTORY
” or
“ MEMORY ”, then press the [ SELECT ] soft key.
3. Rotate the DIAL/ENT knob to select a name that is
stored in the individual/position directory.