Standard Horizon GX2400GPS, Руководство пользователя

Страница: 55 / 148

53
6. Repeat steps 4 and 5 until the name is complete. The name can consist of
up to fifteen characters, and if you do not use all fifteen characters, select
“→” to move to the next space. The “→” can also be used to enter a blank
space in the name.
If a mistake is made entering in the name, press the [◄] or [►] key to select
“←” or “→”, press the [ SELECT ] soft key until the incorrect character is
selected, then perform steps 4 and 5.
7. When finished entering the name (using eleven characters or less), press
the [ FINISH ] soft key to advance to the MMSI number entry.
8. Rotate the DIAL/ENT knob to select “ MMSI: ”, then press the [ SELECT ] soft
key.
9. Press the [◄] or [►] key to select numbers, 0 - 9. To enter the desired
number and move one space to the right by pressing the [ SELECT ] soft key.
Repeat this procedure until all nine space of the MMSI number are entered.
If a mistake is made entering in the MMSI number, press the [◄] or [►]
key to select “←” or “→”, press the [
SELECT
] soft key until the incorrect
character is selected, then perform step 9.
10. When finished entering the MMSI number, press the [ FINISH ] soft key.
11. To store the entered data, Rotate the DIAL/ENT knob
to select “ SAVE ”, then press the [ ENTER ] soft key.
12. To enter another individual address, repeat steps 2
through 11.
13. Press the [ CLEAR ] key to return to radio operation.
11.4.2 Setting up the Individual Call Reply
This menu item sets up the radio to manually (default setting) or automatically
respond to a DSC individual call requesting you to switch to a working channel
for voice communications. When “MANUAL” is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller ID on a cellular phone.
1.
Press & hold [
]

“ DSC SETUP ”

“ INDIVIDUAL REPLY ”
2. Rotate the DIAL/ENT knob to select “ AUTO ” or
“
MANUAL
”.
3. Press the [
ENTER
] soft key to store the selected
setting.
4. Press the [ CLEAR ] key to return to radio operation.