Standard Horizon GX2400GPS, Руководство пользователя

Страница: 36 / 148

34
NOTE
The priority channel or the sub channel may be changed from CH16 (default)
or CH9 (default) to another channel. Refer to section “ 17.7 PRIORITY CHAN-
NEL ” or “ 17.8 SUB CHANNEL ”.
9.10 SCANNING
The transceiver will automatically scan channels programmed into the preset
channel memory and also the scan channel memory, and the last selected
weather channel.
When an incoming signal is detected on one of the channels during scan, the radio
will pause on that channel, allowing you to listen to the incoming transmission.
The radio will automatically start scanning again after the transmission stops.
9.10.1 Selecting Scan Type
1.
Press & hold [
]

“ CHANNEL SETUP ”

“SCAN TYPE”
2. Rotate the DIAL/ENT knob to select “ PRIORITY ” or
“ MEMORY ”.
3. Press the [ ENTER ] soft key to store the selected
setting.
4. Press the [ CLEAR ] key to return to radio operation.
Memory Scan
(
M-SCAN
)
CH12
CH09
CH1001
CH15
CH1018
CH1022
CH1061
CH1078
CH68
CH88
Priority Scan
(
P-SCAN
)
Priority Channel
CH12
CH09
CH1001
CH15
CH1018
CH1022
CH1061
CH1078
CH68
CH88
9.10.2 Programming Scan Memory
1.
Press & hold [
]

“ CHANNEL SETUP ”

“ SCAN MEMORY ”
2. Rotate the DIAL/ENT knob to select a desired channel
to be scanned, then press the [ MEM ] soft key. The
“ ON ” icon will appear at the right side of the selected
channel.
3. Repeat step 2 for all the desired channels to be scanned.